Rubber Conveyor Belt

bando RUBBER CONVEYOR BELT
bando BELT CONVEYOR
bando CONVEYOR BELT
bando RUBBER CONVEYOR BELT
bando BELT CONVEYOR
bando rubber conveyor belt
RUBBER CONVEYOR BELT bando
bando CONVEYOR BELT
bando BELT CONVEYOR
bando RUBBER CONVEYOR BELT bando BELT CONVEYOR bando CONVEYOR BELT bando RUBBER CONVEYOR BELT bando BELT CONVEYOR bando rubber conveyor belt RUBBER CONVEYOR BELT bando bando CONVEYOR BELT bando BELT CONVEYOR
h
PRODUCT RANGE

Belt width: 300 ~ 3.000 mm
Belt length: Min 30 meters
Top Cover thickness: 0 ~ 30 mm
Bottom Cover thickness: 0 ~ 30 mm
Number of ply: 1 ~ 8 ply
Belt strength: 100 ~ 2.800 kgf/cm
Packing weight: 30 ton max
Roll Diameter: 3.4 m max
Selection of canvas: EP (Polyester-Nylon)
Selection of cover rubber

h
PRODUCT RANGE

General Use : JIS-L, JIS-G, JIS-S, Grade M

Special Use
Impact & abrasive: UIP, SAR
Heat Carry: HC-513, HC-710
Oil Resistance: OR-210, OR-220
Flame Resistance: FR-300T
Chemical Resistance: CR

h
COVER RUBBER
GENERAL USE
JIS-L Used for general conveyor belts when the materials to convey is low abrasive.
Abrasion loss max. 400mm3
JIS-G Used for general conveyor belts when the materials to convey is medium abrasive.
Abrasion loss max. 250mm3
JIS-S Used for general conveyor belts when the materials to convey is abrasive.
Abrasion loss max. 200mm3
GRADE M Used as cover rubber for general and high tension conveyor belts, high abrasion        resistance and cut-and-gouge resistance with cold resistance down to – 50o F.
Abrasion max. 120mm3
SPECIAL USE
UIP Suitable  for conveying large size lump sharp and rugged materials with superior in impact resistance and cut  and gouge resistance.
SAR Used as cover rubber for superior in extreme abrasion resistance.
Abrasion loss max. 90mm 3
HC-513 (Styrene Butadiene Rubber) SBR type standard Heat Resistant belt. Max. temp of material handled is 150oC and max. temp of belt surface is 100o C. This grade belt is for conveying hot material like coke,foundry casting,etc.
HC-710 Special synthetic rubber with Ethylene Propylene Diene Monomer (EPDM). Max. temp of material handled is about 400o C and max. temp of belt surface is 180o C. This grade belt is for conveying hot material like clinker, coke, etc.
OR-210 Excellent oil resistance with NBR (Nitrile rubber). Generally use to convey materials soaked with or containing oil. Suitable for transporting garbage, sewage and substances containing oil.
OR-220 Medium oil resistance with cold resistance. Typical application : wood chips, refrigerated fish, etc.
FR-300T Excellent fire resistance with Neoprene rubber. This self extinguishing belt for mines and other locations when potential for fire hazard exist, for underground operations, and power plant.
CR Used as cover rubber for handling various  kind of chemical or  materials mixed with chemical contents (contains degree pH) such as phosphate base fertilizer, etc.

 

h
COVER RUBBER

 

GENERAL
USE
JIS-L Used for general conveyor belts when the materials to convey is low abrasive.
Abrasion loss max. 400mm3
JIS-G Used for general conveyor belts when the materials to convey is medium abrasive.
Abrasion loss max. 250mm3
JIS-S Used for general conveyor belts when the materials to convey is abrasive.
Abrasion loss max. 200mm3
GRADE M Used as cover rubber for general and high tension conveyor belts, high abrasion        resistance and cut-and-gouge resistance with cold resistance down to – 50o F.
Abrasion max. 120mm3
SPECIAL
USE
UIP Suitable  for conveying large size lump sharp and rugged materials with superior in impact resistance and cut  and gouge resistance.
SAR Used as cover rubber for superior in extreme abrasion resistance.
Abrasion loss max. 90mm 3
HC-513 (Styrene Butadiene Rubber) SBR type standard Heat Resistant belt. Max. temp of material handled is 150oC and max. temp of belt surface is 100o C. This grade belt is for conveying hot material like coke,foundry casting,etc.
HC-710 Special synthetic rubber with Ethylene Propylene Diene Monomer (EPDM). Max. temp of material handled is about 400o C and max. temp of belt surface is 180o C. This grade belt is for conveying hot material like clinker, coke, etc.
OR-210 Excellent oil resistance with NBR (Nitrile rubber). Generally use to convey materials soaked with or containing oil. Suitable for transporting garbage, sewage and substances containing oil.
OR-220 Medium oil resistance with cold resistance. Typical application : wood chips, refrigerated fish, etc.
FR-300T Excellent fire resistance with Neoprene rubber. This self extinguishing belt for mines and other locations when potential for fire hazard exist, for underground operations, and power plant.
CR Used as cover rubber for handling various  kind of chemical or  materials mixed with chemical contents (contains degree pH) such as phosphate base fertilizer, etc.

 

SPECIFICATION OF CONVEYOR BELT

    

 

TYPE OF CONVEYOR BELT

BUCKET ELEVATOR

  • Application : Bucket can be attached to vertical installed belt, which is suitable for conveying bulk materials suchas grains and cement products.
  • Features :
    1. Low elongation
    2. Bucket can firmly attached to the belt with bolts
  • Product Range :
    Belt Width : 100 ~ 2.200 mm
    Tensile Strength : 400 ~ 2.800 kgf/cm²

V-CLEAT

  • Application : Inclines up to 30 degrees, depending on the goods being conveyed. Suitable for the conveyance of unbagged gravel and sand, bulky goods and bagged goods.
  • Features : Cleat Belts are effective in preventing load spillage and drops in inclined conveyance, as well as for the transport of granular materials.
  • Product Range :
    Belt Width            :  300 ~ 900 mm
    Tensile Strength : 100 ~ 1.000 kgf/cm²
    Cleat Height       : 5mm
    Cleat Width        : 12 mm
    Cleat Angle        : 120°
    Cleat Pitch         : 75 mm

ROUGH TOP

  • Application : This conveyor belt has a loosely textured surface and is suitable for the conveyance of bags and packaging up a medium with Max inclination 30°
  • Features :
    1. Strong corrugated surface textureabsorbs the impact and prevents conveyed object from spiling.
    2. Shock absorption reduces the possibility of damaging conveyed material.
  • Product Range :
    Belt Width            :  300 ~ 1.200 mm
    Tensile Strength : 200 ~ 1.000 kgf/cm²

FLEXOWELL

  • Application : This conveyor belt has a CLEAT and SIDEWALL and is suitable for the conveyance of gravel or sand.
  • Features : Effective space and it’s can handling material up to 90o
  • Product Range :
    Belt Width            :  100 ~ 1.600 mm
    Tensile Strength : 200 ~ 800 kgf/cm

STEEL CORD

  • Application :
    1.Long span
    2.High strength
    3.High capacity
  • Features :
    1.Excellent bending resistance
    2.Extremely small elongation
    3.Excellent dynamic adhesion
    4.Excellent impact resistance
  • Product Range :
    Belt Width            :  800 ~ 1.800 mm
    Tensile Strength : ST-500 ~ ST-5000

          Test Bakar NonFR

          Test Bakar FR-300T

          PT BANDO INDONESIA (PT BI) adalah leading manufacture produk conveyor belt di Indonesia. PT BI merupakan joint venture manufacturing company antara  PT Kreasi Utama Investama (Gajah Tunggal Group) and Bando Chemical Industries Ltd Japan (BCI Japan), dimana BCI Japan merupakan salah satu world’s leading integrated manufacturers of rubber belts sejak 1906.

          Pabrik PT BI berdiri sejak tahun 1987 dan berlokasi di Kawasan Industri Gajah Tunggal di Jatiuwung Tangerang.

          PT RANADITYO SUKSES MAKMUR (PT RSM) telah ditunjuk oleh PT BI sebagai Authorized Agent sejak tahun 2010 untuk menjual dan menyalurkan produk BANDO yang meliputi : Conveyor Belt, Rubber Lagging dan Skirt Rubber.

           

          Lihat Spareparts conveyor belt lainnya
          Marketing Office

          Jl. Bakti 4 Kav. 52, Cilandak Timur, Pasar Minggu

          Jakarta Selatan 12560, Indonesia

          Workshop

          Kawasan Pergudangan Ragam Industri Jemundo Blok D No. 3, Kletek, Taman Sidoarjo,

          Jawa Timur , Indonesia

          Telepon
          • (021) 7823856
          • 0855-808-5555
          Email
          • sales@ranadityo.co.id
          • ranadityo_suksesmakmur@yahoo.com
          Whatsapp
          • 0855 105 8888
          Office Hours

          Monday  - Friday
          08:00 AM - 05:00 PM

          Hubungi Kami

          Our customer support team is here to answer your questions. Ask us anything!